Cyclo Ultraweld Headliner Adhesive Spay

Cyclo Ultraweld Headliner and Carpet Adhesive

REPAIR VEHICLE INTERIORS: Ultraweld is a high-strength spray adhesive to repair your interior parts that have become detached or loosened. Cyclo Headliner Adhesive is resistant to extreme weather conditions, water-resistant, and dries clear for a neat appearance. 

HIGH TEMPERATURE: Ultraweld high-temperature formula maintains a high bond strength at temperatures up to 170 degrees F (77 degrees C).

AUTO HEAVY DUTY APPLICATIONS: Ideal for headliners, carpets, trunk linings, and inside door panels.

MARINE APPLICATIONS: Cyclo Ultraweld Headliner and Carpet Adhesive excels for attaching boat upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board.

Cyclo Ultraweld Headliner and Carpet Adhesive

• Provides the strongest bond for your vehicle headliner and carpet.
• Superior moisture, temperature, and water resistance allow for the longest-lasting bond possible.
• Non-staining formula - Non-chlorinated
• 14.25 aerosol spray can

The 3-way adjustable sprayer bonds carpet and foam to: 

• Metal
• Fabric
• Leather
• Plastic
• Wood
• Paper

FAST AND EASY DIRECTIONS

1. Start with clean, dry, and free of contaminants, such as wax, oil, grease, surface 
2. Use masking tape to protect surrounding areas 
3. Shake well before use.
4. Turn the nozzle to the desired pattern. Low, medium, or high.
5. Hold can 6-8 inches from the work surface and apply 2-3 uniform overlapping coats. Allow a minimum of 5 minutes drying time between coats. Apply additional coats in opposite direction from first. For stronger bonds, apply adhesive to both surfaces.
6. Allow adhesive to dry for 5 minutes or until tacky.
7. Press surfaces together using firm, uniform pressure eliminating air pockets. Bonds must be done within 15 minutes of spraying. Full cure is achieved in 24 hours at 70 degrees F
8. To clean the nozzle, invert the can, and spray until no adhesive appears.